GRIDIRON
GRIDIRON
GRIDIRON
GRIDIRON
TM
Custom Tool Storage
TM
Backpack Blower Holder
Instruction Manual
Thank you for purchasing this Gridiron product
Installation
1 The fasteners are assembled at the factory but can loosen
during shipping. Assemble any loose bolts, washers, and T-
nuts only as shown (NOTE- INCORRECT ASSEMBLY WILL
RESULT IN DAMAGE.)
2 The GRIDIRON Blower Rack can be mounted to Gridiron
Posts or to a 2x4 or other suitable framework, See page 2.
(Obtain required hardware locally)
3 Mount the blower shelf using 5/16-18 x 3/4 screws, lock and
flat washers, and a double T-nut. Tighten in place.
4 Place the blower bracket about 8 to 10 inches above the the
shelf using 5/16-18 x 3/4 screws, flat washers, and a double
T-nut. Adjust up or down to allow easy mounting and dis-
mounting of your blower. Tighten in place.
5 Place the blower hooks on the bracket and slide as shown,
facing out for wide blower frames or facing in for narrow
blower frames. Adjust as necessary for a snug fit.
6 Place the blower loop in a suitable location to allow secure
storage and easy mounting and dismounting of the blower. It
can be placed above on the same Gridiron post, to the side on
another Gridiron post, on the trailer rail or wall, or any other
suitable location. (Obtain hardware locally for wall or trailer
rail mounting)
Assemble T-nuts with pilot
to inside of post.
WARNING!
DAMAGE MAY RESULT
T-nut
Pilot
Wide frame
blowers
Narrow frame
blowers
Step 5. Blower
hook adjustment
