Phillips Screwdriver
Power screwdriver may also be used,
if desired.
Parts List
Need assistance? Call 1-800-730-6682 for NOVA Solutions Customer Support
Page 1 of 4
Intelligent Motion Technology
™
Overview
The Trolley
™
E-Class includes
Intelligent Motion Technology.
™
This feature reduces the risk of accidental damage and personal in-
jury. Utilizing information from various different sensors,
Intelligent Motion Technology
™
continually monitors the Trolley’s operational
status and delivers information to the power control module.
If conditions create a “conflict” within The Trolley’s programming, the system will automatically take action to reduce damage or
injury. See below for some common operational conditions and how to resume normal operation.
© 2009, NOVA Solutions, Inc.
NOVA products are protected by various U.S. and foreign patents issued and/or pending.
INST_TR_E_01_11/10/09
Operational Guidelines
Power Failure
Operational Status
Condition
• In the event of a power failure during operation...
• If someone or something obstructs the upward
motion of the monitor (such as someone leaning
on or pushing down on the monitor)...
• If the monitor is moved out of vertical alignment
while Trolley is operating...
• If The Trolley senses an obstruction in the path of
the access door...
To Resume Operation...
Unit will STOP
Unit will STOP
Unit will STOP
Unit will STOP
Once power is restored, push the “Up” button to resume
normal operation. The Trolley will return to the “Up” position.
Once obstruction is cleared, push the “Up” button to resume
normal operation. The Trolley will return to the “Up” position.
Move monitor to fully vertical position. Push “Up” to resume
normal operation.
Note: The Trolley will not operate when the monitor is tilted.
The Trolley’s “Over-current Sensor” will stop the unit from
operating until the door obstruction is removed. Once the
path is clear, push either “Up” or “Down” buttons to resume
normal operation.
For more information on installation and operation of The Trolley
™
E-Class,
please contact Customer Support at 800-730-6682 or [email protected]
The Trolley
™
E-Class
Personal Monitor Arm System
Installation & Operating Instructions
Step 1:
The Trolley™ E-Class
Removable Metal
Front Cover
Trim Ring
(Ships with Flush Mount or Surface Mount)
75mm VESA
Plate
(100mm
VESA Plate
Installed)
Keys
Qty. 9
#6 x 3/4” screws
Qty. 4
Monitor screws
Phillips pan head
M4, length: 6mm
Qty. 2
Wire management
grommet screws
Phillips pan head
3mm, self-threading
screw, length: 10mm
Note: Do NOT connect the Trolley E-Class to power source until Step 4.
1a. Remove Trolley E-Class
and parts from shipping
box.
a.
1b. Place Trolley E-Class
in its upright, vertical
position with the open
interior side facing
you.
b.
Step 2:
2a. With arm in down
position, remove black
cable management
cover.
2b. Remove right
screw from cable
retention
clip on cable manage-
ment channel. Then
loosen left screw
and rotate clip
downward.
The Trolley
™
E-Class
Personal Monitor Arm System
a.
b.
Tools (not included)
Page 4 of 4
Rubber Mallet
Obstruction During Upward Motion
Monitor is Tilted During Operation
Access Door is Obstructed or Jammed
Operational Guidelines