FREE HELPLINE - PHONE 0800 426 100
1M WARDROBE SHELF INSTALLATION INSTRUCTIONS
TO SUIT S100W AND S100H SHELVES
SCREW(M3.5*12MM)
8 PCS
WALL PLUG - 8 PCS
SCREW(M3.5*35MM)
8 PCS
SHELF END SUPPORTS
2 PCS
SHELF (1000W X 400D MM)
1 PC
SUGGESTION:
If you wish to adjust the width of a
shelf, first measure and mark it. Place
a strip of masking tape on both sides
of the area you wish to cut, re-mark
the required length and cut through
the tape. When completed remove
the tape to reveal a nice clean cut.
We recommend a minimum
8pt saw for melamine.
PANEL & COMPONENT
IDENTIFICATION
WALL
PLUGS
OR
Mount the support brackets on the wall using
the longer screws and wall plugs. If you are
mounting the bracket to the side of a tower,
use the short screws without the wall plugs.
Once the brackets are
positioned level on opposing
walls, place the shelf
into the support brackets.
