NFN Gateway PC Configuration Procedure
NFN Gateway PC Configuration
19
NFN Gateway Installation & Operation Manual - P/N: 52307:Rev: D 06/01/07
About the NFN Gateway Mode Setting
Figure 2.8 NFN Gateway PC Mode Setting
The NFN Gateway PC’s operation mode matches the mode that has been selected using the
Configuration Tool’s System Options functionality. Refer to the Workstation or Configuration Tool
manuals for information about selecting these modes:
Supervising Station Mode
Refer to the Workstation manual for a “Proprietary Supervising
Station Mode Overview”.
FCC and FCC+DCC Mode
Refer to the Workstation manual for a “Fire Command Center
(FCC) Mode Overview (PPU)”.
2.3.2 Login Password Settings
The first time the gateway is started the factory default password is used (00000000 - eight zeros),
after the initial configuration it is highly recommended that you can the password.
Step 1. Select Tools >Set Gateway Password. The Gateway Login (change password) window
displays.
Figure 2.9 Gateway Login - Change Password
Step 2. Type in the current password in the Password field.
• Passwords are case-sensitive.
• Alpha and numeric characters are supported.
• 1 character minimum and 8 character maximum.
Step 3. Type in a new password in the New Password field.
Step 4. Type in the new password again in the Re-Enter New Password field.
Step 5. Click the OK button to complete the password change.
You have completed
"NFN Gateway PC Configuration"
NOTE:
You can only select the FCC and FCC+DCC modes if you only have one NFN gateway
connected to the Workstation. Those modes are not available with multiple NFN gateways or if
any other type of gateway is configured for your system.