INTRODUCTION
The Singulair system is the finest equipment available
and utilizes the most up-to-date wastewater treatment
technology. It is a sound investment that protects you and
the environment. Please take the time to familiarize
yourself with the contents of this manual.
HOW THE SINGULAIR
®
SYSTEM WORKS
Developed to serve homes and small businesses beyond
the reach of city sewers, the Singulair system employs the
extended aeration process. Similar to the treatment method
used by most municipal
wastewater treatment
facilities, this process
involves a natural,
biological breakdown of
the organic matter in
wastewater.
Wastewater enters the
pretreatment chamber
where anaerobic
bacterial action
combines with the
effects of gravity to
precondition the waste
before it flows into the
aeration chamber. Once
in the aeration chamber,
aerobic bacteria utilize
the organic matter in
the wastewater to
biologically convert the
waste into stable
substances. Following aeration, flow is transferred to the
clarification chamber where the effects of gravity settle out
biologically active material. The Bio-Static sludge return,
located in the clarification chamber, creates hydraulic
currents that gently transfer settled particles back to the
aeration chamber. As clarified liquids pass through
the Bio-Kinetic system, they are filtered, settled and
flow equalized. As a result, complete pretreatment,
aeration, clarification and final filtration are assured. The
Singulair system reliably protects you, your property and
the environment.
FEATURES AND ADVANTAGES
Singulair tanks, access risers and covers are reinforced
precast concrete, manufactured by the licensed Norweco
distributor. Internal walls and baffles are cast-in-place to
insure uniformity and maximum strength. All components
within the system that will contact the wastewater and
provide treatment are constructed entirely of molded
plastic, stainless steel or rubber.
The Singulair aerator is powered by a 1725 RPM, 115 volt,
60 hertz, single-phase, fractional horsepower motor. It is
the only electrically powered component in the Singulair
system. The aerator
has been designed
specifically for use in
the Model 960. It costs
less to operate and
consumes fewer kilowatt
hours of electricity than
most major appliances.
Singulair aerators are
supplied with a prewired
electrical control center
contained in a corrosion
resistant enclosure.
The control center
contains the Singulair
time clock and selector
switch that control
aerator operation. The
local distributor’s name,
address and telephone
number are displayed on
the control center cover.
All system controls and necessary owner information are
conveniently located at your fingertips.
Non-mechanical flow equalization and final filtration is
accomplished within the Singulair tank by the Bio-Kinetic
system. This revolutionary device is installed in the
clarification chamber and connected to the system outlet.
Optional chlorination and dechlorination may be included in
the Bio-Kinetic system if required. All Singulair components
work together to assure complete pretreatment, aeration,
clarification and final filtration.
MODEL 960 WASTEWATER TREATMENT SYSTEM
OWNER’S MANUAL
