Page 10 of 14
3. Never use your hands to locate a hydraulic leak on attachments. Use a small piece of
cardboard or wood.
4. Never replace hex bolts with less than grade five bolts unless otherwise specified. Refer to
bolt torque chart for head identification marking.
Storage Safety
1. Store the unit in an area away from human activity. Do not permit children to play on or
around the stored unit.
2. Make sure all parked machines are on a hard, level surface and engage all safety devices.
3. At the end of the working season, or when the box scraper will not be used for a long period,
it is good practice to clean off any dirt or grease that may have accumulated on the blade and
any of the moving parts.
4. Inspect the blade for loose, damaged, or worn parts and adjust or replace if needed.
5. Repaint parts where paint is worn or scratched to prevent rust.
6. Store box blade in a clean, dry place.
Parts Diagram
Location
Description
Measurement
4’
5’
6’
A
Box Overall Height
34-
5/8’’ 34-5/8’’ 34-5/8’’
B
Maximum Ripper Height
3-
5/8’’
3-
5/8’’
3-
5/8’’
C
Maximum Ripper Depth
3’’
3’’
3’’
D
Box Height
17-
1/2’’ 17-1/2’’ 17-1/2’’
