Northern Telecom Meridian 1 PC Console Interface Unit, Руководство по установке и обслуживанию

Страница: 86 / 232

Page 76 of 220 Programming the Meridian Companion system
553-3601-200 Standard 7.00 November 1998
Operating the Administration Terminal
Adjusting the contrast
If you find the Administration Terminal’s display difficult to read, you can
adjust the contrast.
Note: This feature will not work while you are in a Configuration,
Maintenance, or Administration session.
1. Press
ƒ•‡
. The display shows Contrast level followed
by the current contrast level expressed as a digit.
2. Press a dialpad button between 1 and 9 to select a new contrast level, or
press
DOWN or UP .
3. Press
OK
or
®
to select the contrast level you prefer.
Entering a Configuration programming session
1. Press
ƒ••‚
.
2. Enter the Installer password. The default password is
‚‚‚‚
(see
“Changing passwords” on page 88).
If the password is correct, the display shows
A. Configuration
.
If the password is incorrect, the display shows
Password:
. Press
RETRY
and enter the password again.
By using the arrow keys, you can select a programming category and find the
appropriate submenus for items you want to program.
Entering an Administration session
1. Press
ƒ••·
. The display shows Password: .
2. Enter the Administration password. The default password is
····
(see “Changing the Administration password” on
page 90).
If the password is correct, the display shows 1. Registration .
If the password is incorrect, the display shows Password: . Press RETRY
and enter the password again.