Northern Telecom Flash Basic 2, Руководство по установке

Страница: 29 / 34

23
P0908433 01 Flash Installation Guide
Reinstalling Flash
To change the Feature Code range or Group List availability you may need
to reinstall Flash.
Important: When you reinstall Flash, all of the configuration programming
is erased.
To reinstall Flash:
After the reinstall is complete, you must initialize Flash as described earlier
in this guide and re-enter configuration programming.
1. Enter the System Administration Feature
Code.
The default code is
ƒ · ° ‹.
2. Enter the System Coordinator mailbox
number and password and press
OK .
Refer to Table 4, “System Coordinator
mailbox number and default password,” on
page 15.
3. Press
⁄.
4. Enter the reinstall password
‡‹›fl‡°¤fifi (REINSTALL)
and press
OK .
5. Press YES .
When the system has been reinstalled
(approximately four minutes), the display
shows
System Ready
and
Exit
. The display
then returns to the Norstar date and time.
Log:
QUIT RETRY
Admin
MBOX AA OTHR
Pswd:
RETRY
Reset database?
NO
Resetting...