background image

48 / Answering calls

Compact ICS 4.0 System Coordinator Guide

P0881596 Issue 02

Turning Privacy on or off for a call

ƒ°‹

Lines in your system can be configured to have automatic 
privacy. If a line is not programmed with privacy, anyone with 
the line assigned to their telephone can join your call by 
pressing the line button. If a line is programmed with privacy, 
only one person at a time can use the line.

Privacy control cannot be used on internal or conference calls.

When another telephone joins a call, the participants on the 
call hear a tone, and a message appears on the Norstar display. 
You cannot join a call without this tone being heard.

Creating a conference by releasing privacy

If a line is programmed with privacy, you can turn privacy off 
to allow another person with the same line to join in your 
conversation and form a conference. All the rules applicable to 
a conference apply except there is only one line in use, instead 
of the normal two. This means that you cannot split a 
conference set up using Privacy.

1. Press 

ƒ°‹.

2. Tell the other person to press the line button and join your 

conversation.

Only two Norstar telephones in addition to the external caller 
can take part in this kind of conference.

Making a call private

If a line is programmed to not have privacy, you can turn 
privacy on for a call, preventing other people with the same 
line from joining your conversation.

Press 

ƒ°‹.

p0881596.book  Page 48  Wednesday, November 18, 1998  4:50 PM

Содержание Compact ICS 4.0































































































































































































































































Отзывы: