Northern Diver (International) Ltd.
East Quarry, Appley by Lane North, Appley Bridge.
Wigan, Lancashire. WN6 9AE
WWW.NDIVER.COM
¦
+44 (0) 1257 25 44 44
¦
CERTIFICATION BODY:
INTERTEK Italia S.p.A.
Via Guido Miglioli 2/A 20063 Cernusco sul Naviglio – Milano (European Notified
body No. 2575)
These products are classed as Personal Protective Equipment (PPE) by the Regulation EU 2016/425 and have been shown to comply
with this regulation through the European Standard EN ISO 20347:2012
CAREFULLY READ THESE INSTRUCTIONS BEFORE USING THIS PRODUCT
This footwear is designed to minimise the risk of injury from the specific hazards as identified by the marking on the particular product
(see marking codes below).
However, always remember that no item of PPE can provide full protection and care must always be
taken while carrying out the risk-related activity.
PERFORMANCE AND LIMITATIONS OF USE
– These products have been tested in accordance with EN ISO 20347:2012 for the
types of protection defined on the product by the marking codes explained below. However, always ensure that the footwear is suitable
for the intended end use.
FITTING AND SIZING
– To put on and take off products, always fully undo the fastening systems. Only wear footwear of a suitable
size. Products which are either too loose or too tight will restrict movement and will not provide the optimum level of protection. The
size of these products is marked on them
COMPATIBILITY
– To optimise protection, in some instances it may be necessary to use this footwear with additional PPE such as
protective trousers or over gaiters. In this case, before carrying out the risk-related activity, consult your supplier to ensure that all your
protective products are compatible and suitable for your application.
STORAGE AND TRANSPORT
– When not in use, store the footwear in a well-ventilated area away from extremes of temperature.
Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet, allow it to dry slowly and
naturally away from direct heat sources before placing it into storage. Use suitable protective packaging to transport the footwear, e.g.
the original container.
REPAIR
– If the footwear becomes damaged, it will NOT provide the optimum level of protection, and therefore should be replaced as
soon as is practicable. Never knowingly wear damaged footwear while carrying out a risk related activity. If in doubt about the level of
damage consult your supplier before using the footwear.
CLEANING
– Clean your footwear regularly using high quality cleaning treatments recommended as suitable for the purpose NEVER
use caustic or corrosive cleaning agents.
WARNING
- The footwear must not be worn without hose.
INSOCKS
– The footwear is supplied with a removable insock or seat sock which was in place during testing. The insock should
remain in place whilst the footwear is in use. It should only be replaced by a comparable insock supplied by the original manufacturer.
WEAR LIFE
– The exact useful life of the product will greatly depend on how and where it is worn and cared for. It is therefore very
important that you carefully examine the footwear before use and replace as soon as it appears to be unfit for wear. Careful attention
should be paid to the condition of the upper stitching, wear in the outsole tread pattern and the condition of the upper/outsole bond.
MARKING
– The product is marked with:
UK8 EU42
The size of the product
TP
Identification of the manufacturer
PO: 1234
Production order number
03/2017
The date of manufacture (Month/year)
The CE mark
EN ISO 20347:2012
The number and date of the standard
OB E FO SRA
The category of protection offered
ROCKSWIM NS
Identification of the product style.
Northern Diver (International) Ltd. East Quarry… Name and address of the manufacturer
USER INSTRUCTION
ROCKSWIM NON-SAFETY
