NorthEast Monitoring, Inc. NEMM046-Rev-D
Page 8 of 9
Gateway - Socket Technical Manual
Chapter 7. Instructions for the Patient
7. Instructions for the Patient
An abbreviated
version of these
instructions has
been included on
the label on the top
of the Gateway.
1.
The Gateway
should be placed in
a location that the
patient will be near
(within 10 meters)
frequently.
2.
The Gateway’s
power adapter
should be plugged
into the Gateway,
and plugged into an outlet which has power all the
time (is not controlled by a wall switch)
3.
The Gateway’s antenna should be in an upright posi-
tion.
4.
The Gateway has three lights. The third light (right-
most), is the wireless connection indicator. Once
plugged in, this light will flash red.The more the
better, but if the light is blinking between 2 to 4
times in a row, there is an acceptable wireless con-
nection. If the light only does a single blink, there is
no connection at all to the wireless network.
The recorder and Gateway will automatically transmit
any new, previously un-transmitted data when the two
are in sufficiently close proximity.
