NorthEast Monitoring, Inc. NEMM046-Rev-D
Page 5 of 9
Gateway - Socket Technical Manual
Chapter 3. Pairing DR400 with Gateway
3. Pairing DR400 with Gateway
For DR400 recorders to transmit event data, the DR400
must first be paired with a Gateway. The DR400 can
only be paired with one Gateway at a time.
In order to pair with a Gateway, your organization must
obtain a URL-KEY.dat file from NorthEast Monitoring
and the URL_KEY file must be placed in the directory
where the PCPatch utility exists.
The Pair Gateway button will be enabled only if the
URL-KEY file exists in bin or Remote directory where
the PCPatch.exe file is running.
Once the DR400 is plugged into the PC, pair as follows:
1.
Plug in the Gateway and allow it to find the wireless
signal
2.
Start the PCPatch utility
3.
Go to the Settings screen and click on Pair Gateway.
4.
When successful, you should see “Pairing Com-
plete” and the Gateway number and URL-KEY file
information will now appear on the Settings screen.
Once paired with a Gate-
way, the wireless settings
that are programmed into
your site’s URL-KEY, are
visible on the PCPatch util-
ity Settings screen.
All of these settings
must match the set-
tings in the FTP
receiving location in
order for wireless
transmission to take
place.
•
Service URL key -
Your unique identi-
fier
•
Remote Server URL- FTP Server’s fixed IP-address
or domain name.
•
Remote Server Port - defaults to 21 or whatever is
required
•
Carrier APN
•
KEY ID - The receiving center identifier, which is
an ID for the actual unique 256-bit encryption key
for files sent via the Gateway/FTP.
If your URLKEYdat is incorrect or you do not have a
URLKEYdat file, contact NorthEast Monitoring or
your distributor for assistance.
