The HeatmiserNeo Driver
15
Time Clock
Object Type:
[HeatmiserNeo v20\Timeclock]
Object Type:
[HeatmiserNeo v10\Timeclock]
A timeclock object contains values for a programmable time clock. Typically a neoStat-hw in time clock
mode.
Description
Reference Type
Label
Zone label
L
Obj\Text: max 30; Adjustable
Timer State
V51
Obj\OffOn
Standby Mode
Activates standby mode
V46
Obj\OffOn; Adjustable
Away
V1
Obj\NoYes
Holiday
Indicates holiday mode is active. In this
mode the neoStat will only turn on heating
if the room temperature falls below the
Frost Temperature
V26
Obj\NoYes
Hold On
Indicates if boost mode is active. The
boost function manually overrides the
current program for a period of time. Set
‘yes’ to activate boost for Default Hold
Time, or ‘no’ to cancel
V49
Obj\NoYes; Adjustable
Hold Time (mins)
The time remaining in boost mode, if
active. Set a time to activate or extend the
boost time, or ‘0’ to cancel boost.
V25
Obj\Num; Adjustable
Active Level
V63
Obj\Num
Active Profile
V64
Obj\Num
Timeclock – day
Contains a list of on-off times to define the
profile for a
day
. Refer to Program Mode
for which days are in use.
A profile contains up to four on-off times,
referred within Heatmiser at wake, leave,
return, sleep.
The day,
y
, is in the range 1…7 where
1=Monday .. 7=Sunday
T
y
Obj\Times: 4 periods; Adjustable
Fail-safe Mode
V106
Obj\OffOn
Lock
Indicates if the keypad lock is active. Set to
‘Off’ (0) to unlock the keypad
V29
Obj\OffOn; Adjustable
Lock PIN
Set a 4-digit PIN to activate the keypad
lock
V30
Obj\Text: max 4 chars; Adjustable
Low Battery
V31
Obj\NoYes
Online
S
Obj\NoYes
Identify Device
Flashes neoStat screen backlight
V53
Obj\NoYes; Adjust-only
Device Type
V115
Obj\Num
Values: 1=neoStat v1, 2=SmartStat, 3=CoolSwitch,
4=neoStat-RH, 5=WDS, 6=neoPlug, 7=neoAir,
8=SmartStat-HC, 9=neoAir-HW (combined),
10=Repeater, 11=neoStat-HC, 12=neoStat v2, 13=neoAir
v2, 14=Remote Air Sensor, 15=neoAir v2 (combined),
16=RF Switch WiFi, 17=Edge WiFi Thermostat
