background image

 

 

 

M157598L.1

 

 

 
 
 

 

Installation, Operation, and Maintenance Manual

 

 

HOT WATER PRESSURE WASHER: 

Cleans dirty surfaces with high pressure hot water. 

 

To the Owner: 

Thank you for purchasing a NorthStar hot water pressure washer.  Your machine is designed for long 
life, dependability, and the top performance you demand!  Take time now to read through this manual 
so you better understand the machines’ operation, maintenance and safety precautions.  Everyone 
who operates this machine must read and understand this manual.  The time you take now will prolong 
your machine’s life and prepare you for its safe operation.  Enjoy the exceptional performance of your 
NorthStar hot water pressure washer, the industry leader! The manufacturer reserves the right to make 
improvements in design and/or changes in specifications at any time without incurring any obligation 
to install them on units previously sold. 

 

Quick Facts 

Engine Oil 

Engine is shipped without oil.  Fill before starting. Use SAE 10W-30 motor oil. 

Pump Oil 

Pump is shipped with oil.  Check pump oil level before starting. 

Water 

Make sure your water is clean and particle free and tank fed only.  See Installation 
instructions. 

Storage 

Do not allow water to freeze in the pump, hoses, coil, or spray guns. 

Hose reels 

Uncoil hose completely before pressurizing with first use. 

Electric 
Brakes  

Product 157597 requires an electric brake controller (Brake controllers are available in 
our Northern Tool & Equipment Catalogs and Stores). 

Spraying 
Chemicals 

Use any NorthStar brand or equivalent pressure washer chemicals.   
Adjust soap adjustment knob to regulate cleaning power. 

Maintenance 
Schedule 

Engine: 

Oil: change after first 20 hours, then annually or every 100 hours. 
      Check daily. 
Spark Plug: clean every 100 hours, replace annually or every 300 hours. 
Air Filter: clean every 100 hours, replace annually or every 300 hours. 

 

Pump: 

Oil: change after first 40 hours, then every 3 months or 500 hours.  
Mounting Bolts: checked mounting bolts regularly for proper torque         
(see maintenance instructions for torque spec) 

Read and understand all manuals before operating.

 

 

Any Questions, Comments, Problems, or Parts Orders 

Call NorthStar Product Support 1-800-270-0810

  

ITEM NUMBER:    157597, 157598

    

  

SERIAL NUMBER:

 

 

 Engine 

Model: 

 

 

 

 

Pump Model:  

 

 

 Flow: 

 

 Pressure: 

 

 Hose 

Length: 

 

 Lance 

Length: 

 

 Nozzle 

Size: 

 

 

®

Содержание M157598L.1





























Отзывы: