ENGLISH
GREAT BRITAIN • CUSTOMER SERVICE
tel. 020 8247 9300 e-mail: [email protected] internet: www.clasohlson.co.uk
Ver
. 20150604
12 V LED Spotlight
Art.no 36-1316
Model MF-3059
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made
to technical data. In the event of technical problems or other
queries, please contact our Customer Services.
Safety
Note:
The product must only be connected to a 12 V DC power
supply.
Care and maintenance
• Clean the product using a lightly moistened cloth.
Use only mild cleaning agents, never solvents or corrosive
chemicals.
• The light bulb cannot be replaced.
Mounting and Connecting
Note:
• Make sure that there are no electrical, water or gas lines
concealed in the wall into which you plan to drill.
• Make sure that the cables are not live whilst you are
connecting the light.
3. Connect the cables
to the terminal block
inside the base
of the light, using
the plus and minus
signs on the terminals
to observe the correct
polarity.
4. Screw the mounting
plate to the wall
and screw
the light back onto
the mounting plate.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.
Specifications
Connection
12 V DC
Bulb type
Warm white LED (3000 K), 80 lm
Beam angle
30°
IP rating
IP20
1. Unscrew the three screws
attaching the mounting
plate to the base of
the light fitting and remove
the mounting plate.
2. Drill a hole in the wall
where the spotlight
is to be mounted
and pull the supply
cables through it.
Pull the supply cables
through the mounting
plate and drill mounting
holes in the wall using
the plate as a template.
Think about the orientation
of the mounting plate when
screwing it to the wall.
It will affect the positioning
of the power switch and
how the light can be angled.
