North Invent Wave II Series, Руководство пользователя, Страница: 15 / 26

Wave II Monitors
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
post@northinvent.com www.northinvent.com
15
8.6. On Screen Display (OSD)
Approximately 20 seconds after monitor power on open OSD with mouse or HMI module. Most functions of the Monitor
can be controlled using the OSD.
The OSD is activated by pressing the MENU key pad if you have a HMI module connected. Else you can open the OSD
via a USB mouse by right clicking. Be aware of that the lock key pad on the HMI has no function on a standard monitor.
The screen backlight (brightness) can be adjusted using the +/− controls on the HMI module but it can also be adjusted
using the OSD and remote control. Normal operation shall be backlight 100%.
The OSD will be deactivated according to the selected period after the last control has been pressed (OSD timeout).
8.7. OSD Division into Folders, Menus, Sub-menus
OSD main page:
Tabs/sub-pages
Slider control
Check box
Radio button