North Invent Wave II Series, Руководство пользователя

Страница: 8 / 26

Wave II Monitors
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
post@northinvent.com www.northinvent.com
8
RS232 – DB9 receptable
Pin Description Pin Description Pin Description
1 Not connected 4 Not connected 7 Not connected
2 TxD (Transmit Data) 5 GND 8 Not connected
3 RxD (Receive Data) 6 Not connected 9 Not connected
The Monitor is equipped with a standard 9-pin D-SUB female connector for RS232 remote control. Further information
about this interface and the remote control is to be found in separate document.
RS422 / 485
Pin Description Pin Description
1 Tx+ (RS422) 3 Rx+ (RS422), Rx+/Tx+ (RS485)
2 Tx- (RS422) 4 Rx- (RS422), Rx-/Tx- (RS485)
Left and right connectors carry same signals and are connected in parallel internally. This allows for easy and more reliably
wiring in daisy-chain configurations as both incoming and out-going wires can be terminated in separate connectors
.
LAN (RJ45)
Pin Description Pin Description
1 DA+ 5 DC-
2 DA- 6 DB-
3 DB+ 7
DD+
4 DC+ 8 DD-