Wave II Monitors
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[email protected] www.northinvent.com
18
Function
Setting
Description
Splash logo timeout (sec)
No logo
1, 2, 3, 4, 5, 10, 30, 60 sec.
Persistent
The monitor can display a logo during startup (bootlogo) based on
a .png file located on the MicroSD card.
No signal to stand-by (sec)
3, 5, 10, 30, 60 seconds
Stay on
Set the time from signal lost to standby mode. In standby mode
the monitor is put low power state while still maintaining ability to
detect if an input signal becomes active.
Stand-by to sleep mode (min)
3, 5, 10, 30, 60 minutes
Do not sleep
Set the time from standby mode to sleep mode. In sleep mode the
monitor is put in the lowest possible power state while still
maintaining ability to receive and respond to a MCCS power mode
command and HMI power button.
