North Invent Wave II Series, Руководство пользователя, Страница: 13 / 26

Wave II Monitors
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
post@northinvent.com www.northinvent.com
13
8.4. OSD Navigation Using HMI
Controls and Indicators are found on the optional HMI Unit (operators panel) either mounted on the monitor or in
connection with the Monitor.
Figure: HMI Panel with controls and indicators.
Normal functioning of the Key Pads and Indicators are explained in the following table:
Control / Indicator Function
POWER Press once to switch the Monitor ON
Press for 5 sec to switch the Monitor OFF
AC Indicates that the Monitor is supplied with 90-264 VAC
DC Indicates that the Monitor is supplied with 18-36 VDC
LOCK No function on standard version
MENU Press once to activate the OSD.
Press to advance to next control within the OSD.
SET
Press to indicate/change the video input source (OSD not active).
Press to go back one level in the OSD or to exit the OSD entirely if at top level.
+ Press and hold to increase the indicator brightness (OSD not active).
Press or hold to increase values (OSD active).
–
Press or hold to decrease the indicator brightness (OSD not active).
Press or hold to decrease values (OSD active).