8806795 05/14
6.5 HP WATER PUMP
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of California
to cause cancer and birth
defects or other reproductive
harm. Wash hands after
handling.
Important!
When using equipment, a few
safety precautions must be
observed to avoid injuries and
damage. Please read the complete
operating manual with due care.
Keep this manual in a safe place,
so that the information is available
at all times. If you give the
equipment to any other person,
give them these operating
instructions as well. We accept no
liability for damage or
accidents which arise due to
non-observance of these
instructions and the safety
information herein.
SPECIFICATIONS
Engine:
4-stroke, single
cylinder
Max Output:
6.5 HP @ 3600
RPM
Fuel Tank:
1.6 Gal, Unleaded
Discharge Capacity:
264
gal/min
Max PSI:
45 PSI
Continuous Running Time:
2-
3 hours (actual time varies with
load)
Total head:
92 ft
Suction head:
26 ft
Oil type:
SAE !0W-30
CAUTION:
FOR YOUR OWN SAFETY
READ INSTRUCTION
MANUAL COMPLETELY AND
CAREFULLY BEFORE
OPERATING. Failure to follow
all instructions as listed
below may result in electrical
shock, fire, and/or serious
personal injury.
CARBURETOR
MODIFICATION FOR
HIGH ALTITUDE USE
At a high altitude, the
standard carburetor air-fuel
mixture is too rich.
Performance will decrease
and fuel consumption will
increase. A very right mixture
will also cause damage to the
spark plug and cause hard
starting. Operation at an
altitude that is different from
the range in which this engine
was certified may increase
emissions when used for an
extended period of time.
High altitude performance
can be improved by specific
modifications to the
carburetor. If the engine is
always operated at altitudes
above 5,000 feet (1,500
meters), have a qualified
mechanic perform the
carburetor modification. This
engine will meet emission
standards when operated at a
high altitude with the
modifications for high altitude
use.
Model: 6795