Nortel Web OS 10.0, Инструкция по применению

Страница: 87 / 482

Web OS 10.0 Application Guide
Chapter 4: OSPF
n
87
212777-A, February 2002
4. Define the backbone.
5. Define the transit area.
The area that contains the virtual link must be configured as a transit area.
6. Attach the network interface to the backbone.
7. Attach the network interface to the transit area.
8. Configure the virtual link.
The
nbr
router ID configured in this step must be the same as the router ID that will be config-
ured for Switch #2 in Step 2 on page 88 .
9. Apply and save the configuration changes.
>> Open Shortest Path First # aindex 0
(Select menu for area index 0)
>> OSPF Area (index) 0 # areaid 0.0.0.0
(Set the area ID for backbone area 0)
>> OSPF Area (index) 0 # type transit
(Define backbone as transit type)
>> OSPF Area (index) 0 # enable
(Enable the area)
>> OSPF Area (index) 0 # ../aindex 1
(Select menu for area index 1)
>> OSPF Area (index) 1 # areaid 0.0.0.1
(Set the area ID for OSPF area 1)
>> OSPF Area (index) 1 # type transit
(Define area as transit type)
>> OSPF Area (index) 1 # enable
(Enable the area)
>> OSPF Area (index) 1 # ../if 1
(Select OSPF menu for IP interface 1)
>> OSPF Interface 1 # aindex 0
(Attach network to backbone index)
>> OSPF Interface 1 # enable
(Enable the backbone interface)
>> OSPF Interface 1 # ../if 2
(Select OSPF menu for IP interface 2)
>> OSPF Interface 2 # aindex 1
(Attach network to transit area index)
>> OSPF Interface 2 # enable
(Enable the transit area interface)
>> OSPF Interface 2 # ../virt 1 (Specify a virtual link number)
>> OSPF Virtual Link 1 # aindex 1 (Specify the transit area for the virtual link)
>> OSPF Virtual Link 1 # nbr 10.10.14.1 (Specify the router ID of the recipient)
>> OSPF Virtual Link 1 # enable (Enable the virtual link)
>> OSPF Interface 2 # apply
(Global command to apply all changes)
>> OSPF Interface 2 # save
(Global command to save all changes)