Nortel RLC Скачать руководство пользователя страница 168 | Manualshive

Страница: 168 / 466

Nortel RLC Скачать руководство пользователя страница 168

142

RLC Installation and Administration Guide

Using Configuration Manager

Standard 4.0

Retrieve

When you click on the Retrieve button on a property sheet,
the configuration stored in the buffer of the unit that you are
connected to (the latest configuration information) displays
in Configuration Manager.
If the retrieval is successful, the following message displays:

Data Received Successfully

Save to Flash

When you choose Upload/Download

→

Save to Flash from

the Menu Bar, the information stored in the logged-on unit’s
buffer is saved to Flash memory. This prevents the
configuration from being lost if the unit loses power.
While in progress, the following message displays in the
status bar at the bottom of the screen:

Save to Flash

When the Save to Flash is completed, the Data Stored to
Flash dialog box displays.
Some changes require a restart of the unit after saving the
changes. If a restart is necessary, Configuration Manager
prompts you to do so.

Notes:

You must click on the Send

button or choose Upload/

Download

→

Send All from the Menu Bar

before

you

choose Upload/Download

→

Save to Flash. Perform a

Save to Flash as often as you think it is necessary, to keep
your configuration information safe.

Do not ignore error messages in the Save to Flash
process. If Save to Flash fails, retry uploading and saving
to Flash. If the problem persists, check the file being
uploaded and report the problem to Nortel.

Operation

Description

«
...
166
167
168
169
170
...
»

Содержание RLC



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов