Nortel Remote Office 9150 Скачать руководство пользователя страница 256

Страница: 256 / 570

228

Remote Gateway 9150 Installation and Administration Guide

Configuring the Remote Gateway 9150 unit

Standard 4.0

BRI Configuration field descriptions

Field

Description

Module #

Select the number identifying the trunk interface module
that you are configuring.

Note:

The number you select must match the module

position where the module has been installed.

Valid options are 4 through 7.
The default is four.

TEI Dropped

When the layer 2 drops, the TEI also drops and must be re-
acquired.

Click on the

Enable

option button if you want the TEI

to drop when the layer 2 drops.

Click on the

Disable

option button if you do not want

the TEI to drop when the layer 2 drops.

The default is Disable.

Note:

This is a CO implementation dependent

configuration.

Содержание Remote Office 9150



























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Remote Office 9150

Отзывы:

Nortel Remote Office 9150, Руководство по установке и администрированию, Страница: 256 / 570

Результаты поиска

Содержание Remote Office 9150

Отзывы: