Nortel Remote Office 9150, Руководство по установке и администрированию, Страница: 168 / 570

140 Remote Gateway 9150 Installation and Administration Guide
Using Configuration Manager Standard 4.0
Check boxes
Fields that contain a blank box beside them are called check boxes . These check
boxes are used to enable or disable the feature associated with that field. To
enable the feature, click on the check box. A check mark displays. When you
click on the check box again, the check box clears (thereby disabling the
feature).
Option buttons
Some fields have multiple options. There is a circle beside each option that is
called an
option button . For these fields, you can only select one option.
To enable an option, click on its associated option button. If you change a
previously selected option, the previously selected option button clears.
In some cases, selecting a particular option button causes the property sheet
contents to change as follows:
„
When a field is dimmed (disabled), it cannot be configured in the context of
the option you selected.
„
Other fields are re-enabled (no longer dimmed).
„
One or more values on the property sheet are replaced with values that are
specific to the option you selected.