Nortel Passport 8000 Series, Установка и обслуживание

Страница: 72 / 120

72 Chapter 3 Installing the 8010co chassis
316314-E Rev 01
Table 11 Item description for chassis and 8004DC power supply grounding
Figure 38 on page 73 shows an example of how to ground two 8010co chassis.
For this example, each chassis is configured with three AC power supplies.
Table 12 on page 74 describes the reference items shown in Figure 38 on page 73 .
Item Description
1 Cabinet frame or equipment rack
2 AWG#6 ground lead (provided with BIP)
3 Upper shelf chassis ground stud.
4 Upper shelf ground lead (not provided).
5 Upper shelf power supply ground leads x 3. (Provided with BIP option)
6 Lower shelf chassis ground stud
7 Lower shelf ground lead (not provided)
8 Lower shelf power supply ground leads x 3. (Provided with BIP option)
9 Single point ground system
10 Awg #6 ground lead (not provided). Customer provides lead to ground
cabinet frame or equipment rack.
11 Rack ground strip (example only). Design and location of this item
determined by customer