manualshive.com logo in svg

Nortel Optical Multiservice Edge 6130, Руководство по планированию, Страница: 188 / 292

Поделиться
Скачать
Nortel Optical Multiservice Edge 6130 Скачать руководство пользователя страница 188

10-2 

  Appendix A: Data communications planning

Optical Multiservice Edge 6130    NT6Q92MA   Rel 1.0   Iss 1  Standard  September 2006

The 

Data Communications Network Planning Guide

, NTR710AM provides 

information on DCN planning for some OSI-based Nortel Networks products. 
This guide includes general information on OSI data communications and 
addressing and can be used as a reference for OSI data communications 
information.

Introduction

OME6130 is an IP managed optical network element (NE), which has the 
capabilities to communicate through both TCP/IP Internet Protocol (IP) and 
OSI Connectionless Network Protocol (CLNP) based networks.

Connectivity of the OME6130 network element to its management system can 
be achieved through:

•

the LAN port (10/100Base-T, RJ-45) located along the OAM port 
interfaces on the OAM circuit pack.

•

the M1/F1 port via modem.

•

SDH Regenerator Section (RS) 192 kbps DCC (D1-D3 bytes) of the 
optical line interfaces.

•

SDH Regenerator Section (RS) 64 kbps user channel (F1 byte) of the 
optical line interfaces.

•

SDH Multiplexor Section (MS) 576 kbps DCC (D4-D12 bytes) of the 
optical line interfaces.

•

SDH Path DCC (F2, F3, or F2-F3 bytes) of the optical line interfaces.

•

SDH VC12 management channel of the optical line interfaces.

•

SDH E1 management channel on the first E1 port of the 28xE1/DS1 circuit 
pack.

Depending on the network topology, the OME6130 can be configured to 
operate as either:

•

an IP router: IP communications are routed using static and/or dynamic 
routing protocol to subtended NEs

•

an IP host: IP communications are not forwarded to other NEs with static 
routing entries providing default routing to the connected IP router.

The OME6130 can use integrated IS-IS (iIS-IS) protocol with auto-tunneling 
in order to establish communications with OSI based network elements.

OME6130 supports Generic Routing Encapsulation (GRE) which can tunnel 
IP management communications into OSI Protocol Data Units (PDU). The 
GRE tunnel can be terminated on an OME6130, other GRE capable NE, or a 
dedicated router to extract the IP management communications before being 
forwarded to the management system.

Содержание Optical Multiservice Edge 6130





































































































































































































































































































Отзывы:

Нет отзывов