Nortel NN10265-111, Техническое описание

Страница: 103 / 118

MCS 5100 RTP Media Portal Basics
103
Copyright © Nortel Networks Limited 2006
12 Move to the Exit menu to save changes and exit the BIOS set
up. The system will reboot.
13 After the system reboots, press the Enter key to boot the default
image.
14 After booting, the login prompt will appear on screen.
Configuring Network Time Protocol
This section includes instruction for synchronizing the RTP Portal clock
to the master clocks. This is performed automatically during installation
if the user entered a Timeserver IP address in
Installing the RTP Media
Portal packages on page 101 . Only modify the ntp.conf file if the
timeserver address(es) change or if they were not entered at install time
for some reason.
From the terminal server
1 Establish a serial terminal connection to the Host CPU card, and
log in the system as
root .
2 Create a new ntp.conf file in the /etc directory.
vi /etc/ntp.cont <Enter>
3 Add the following lines in the text.
server <Machine Logical IP of Management Server> <Enter>
server <Machine Logical IP of Accounting Manager>
<Enter>
driftfile /etc/ntp/ntp.drift <Enter>
4 Save and exit the editor.
5 Verify the file was correctly saved.
more /etc/ntp.conf <Enter>
The display should match the contents entered in the previous
step. Note the clock on the RTP Portal must be set to within one
hour of the time set on the management servers, or Network
Time Protocol will not be able to adjust the time. If the clocks
differ by more than one hour, set the time manually.
date <MMDDHHMM> <Enter>
6 Exit root .
exit <Enter>