Nortel Modular ICS 6.0, Руководство пользователя

Страница: 84 / 294

84 / Time savers for making calls
Modular ICS 6.0 System Coordinator Guide P0992640 03
Changing and adding System Speed Dials
The system coordinator assigns numbers to System Speed Dial
codes for the entire system. See
Adding or changing a system speed
dial
on page 31.
Adding or changing User Speed Dial
To add or change a User Speed Dial number on your
telephone:
1. Press
²¥Ý.
2. Enter a three-digit code from 256 to 279 that you want to
associate with a telephone number.
3. To include a line selection for this number, press the line
or intercom button. To select a line pool, press a
programmed line pool button, or press
the button labelled as
intercom
and enter a line pool access code.
For the M7100 and T7100 sets, you can select only a line
pool.
4. Enter the number you want to program.
5. Press
³
or
OK
.
Displays
Continue entering the number you want to
program. You can change the number by
pressing
BKSP or
Ã
. When you are
finished, press
³
or OK .
Enter the telephone number you want to
program exactly as if you were dialing it
normally. When you are finished, press
³
or OK .
You have entered a code outside the code
range (001-255 for system, 256-279 for
personal).
01:9___
CANCL BKSP OK
Enter digits
QUIT
OK
Invalid code