Nortel Modular ICS 6.0, Руководство пользователя

Страница: 60 / 294

60 / Answering calls
Modular ICS 6.0 System Coordinator Guide P0992640 03
system, one of the callers must have called you on a disconnect
supervised line, or the call is be disconnected.
Displays
Listening to a call as a group
To allow people in your office to listen in on a call using
Group Listening, press
²¡âÛ.
You hear the voice of the caller through the speaker of your
set. Continue to speak to the caller through the telephone
receiver. The microphone of your set is off, so the caller does
not hear people in your office.
You are trying to add a fourth party to your
conference call, or to join two conferences
together. Release one call from the
conference before adding another, or keep
the two conferences separate.
You have put a conference call on hold.
You have tried to make a conference call, but
your system is already handling its maximum
number of conference calls.
You are on a conference with the two lines or
telephones shown. You can drop out of the
conference and leave the other two parties
connected (Unsupervised Conference) by
pressing
TRANSFER or entering the Transfer
feature code.
You have activated the Conference feature
with one call active and another on hold.
Press the line of the call on hold to bring that
person into the conference.
For other displays, see Common feature displays on page 247.
3 parties only
Conf. on hold
Conference busy
Line001 221
TRANSFER
Press held line