Nortel Modular ICS 6.0, Руководство пользователя

Страница: 54 / 294

54 / Answering calls
Modular ICS 6.0 System Coordinator Guide P0992640 03
first followed by calls on the prime line and, finally, calls on
internal lines.
Changing a telephone pickup group
Telephones can be put into and taken out of pickup groups.
You need the programming template found at the front of this
guide. See
Getting started with Norstar
on page 13 for more
information.
1. Press
²¥¥ÛßßÜÝÝ.
2. Press
ÛÜßÝß (the default System Coordinator
password).
3. Press
≠
and enter the internal number of the
telephone you want to program.
4. Press
≠
twice.
5. Press
‘
five times.
6. Press
CHANGE
at
Pickup grp
: to assign the telephone to
pickup group
1
,
2
,
3
, or
4
,
5
,
6
,
7
,
8
,
9
, or to
None
.
Displays
Tip -
A Hunt Group call ringing at a Norstar set DN that is
also a member of a call pickup group can be picked up by any
Norstar set in that call pickup group. For more information on
Hunt Groups see Programming Hunt Groups on page 161.
You are already connected to the telephone
that made the call you are trying to pick up.
This can happen if you are on a call to a
co-worker, your co-worker dials the number
of a telephone in your pickup group, and you
attempt to pick up that call.
Already joined