Nortel Modular ICS 6.0, Руководство пользователя

Страница: 238 / 294

238 / General System features
Modular ICS 6.0 System Coordinator Guide P0992640 03
A telephone may have buttons assigned for lines 001 to 003,
but have only lines 001 and 002 programmed to ring as well.
An incoming call on any of the three lines causes a line button
indicator to flash, and the telephone can be used to answer the
call. This is especially useful for people who monitor other
telephone lines, but want only their own lines to ring.
Target line
A target line is used to route a call directly to a particular
telephone or group of telephones. Target lines are used only
for incoming calls. A single incoming line may provide
connections to several different target lines. This allows each
person or department in the office to have their own number
without having a separate external line for each number.
Line pools
A line pool allows each telephone access to external lines from
a group (or pool) of external lines. You can access such lines
by pressing an intercom button and entering a line pool access
code or by pressing a memory button programmed with the
line pool feature code and a line pool access code.
Tip -
The maximum number of target lines available in the fully
expanded XC system is 192.
Maxi system: lines 157-284
Expanded: lines 157-348
Privacy issue
You can set a target line to Private (default is
Public), however, such features as Call Pickup
can still answer these lines at remote telephones.