Nortel Modular ICS 6.0, Руководство пользователя

Страница: 218 / 294

218 / Using System features
Modular ICS 6.0 System Coordinator Guide P0992640 03
Using special telephones
Direct-dial
You can reach the direct-dial telephone by dialing a single
digit. The direct-dial telephone is usually in a central location,
such as at the desk of an administrative assistant or attendant.
You can have up to five direct-dial telephones for your Norstar
system. It is usually the prime telephone or the central
answering position (CAP).
The direct-dial telephone can send up to 30 messages and can
invoke Services to activate the extra-dial telephone.
You cannot forward calls to a direct-dial telephone that is
outside your Norstar system. See
Making changes to Call
Forward No Answer
on page 36.
Note:
ISDN terminals cannot use the Direct-Dial digit to
reach a Direct-Dial set.
Changing the direct-dial telephone assignments
Your installer or customer service representative sets up the
direct-dial telephone.
You can change which direct-dial telephone a telephone is
assigned to, or assign it no direct-dial telephone.
You need the programming template found at the front of this
guide. See
Getting started with Norstar
on page 13 for more
information.
1. Press
²¥¥ÛßßÜÝÝ.
2. Press
ÛÜßÝß (the default System Coordinator
password).
3. Press
≠
at Terminals&Sets .