background image

 Description

Page 9 of 18

Message Registration

Description and operation

Feature interactions

Multiple Appearance Directory Numbers

Multiple Appearance DNs are charged on the meter assigned to the Prime DN 
(PDN). Data calls are charged to the originating telephone. Maintenance tests 
on metered trunks do not affect the metered values.

Call Transfer

Only the party originating the Call Transfer is metered.

Call Forward

On calls where the Call Forward feature is used, the last party to forward the 
call is metered. This applies to cases where a CO call originates from a Call 
Forward station, and to cases where an established CO call is transferred to a 
station that is forwarded to another internal station.

Conference

Only the party originating the Conference Call is metered.

Trunk-to-trunk calls

Metering of trunk-to-trunk calls using an outgoing CO trunk is not supported 
if the trunk access code is a one- or two-digit access code. Otherwise, a meter 
corresponding to the trunk access code of the metered trunk route is 
incremented. Only three- and four-digit codes are supported for DNs or trunk 
access codes.

Attendants

For attendant-originated calls to CO trunks, the attendant meter is 
incremented. When the call is extended, the attendant is metered until a 
telephone within the Meridian 1 is added to the conference. When the 
attendant uses a loop key, the call is metered to the Room DN connected 
through that key; otherwise, the attendant meter is incremented.

Содержание Message Registration





















Отзывы: