Nortel Meridian Meridian 1, Планирование, установка и инструкции по эксплуатации

Страница: 312 / 556

Chapter 20 — Meridian Mail Compact Option installation and maintenance Page 293 of 536
Option 11C Compact Planning, Installation, Fault Clearing and CCBR Guide
Terminal problems
Under most circumstances, the Meridian Mail Compact Option system
should start up automatically and display the Meridian Mail Compact Option
logon screen on the system administrator’s terminal. You may notice
problems at start-up or the terminal may become disabled during normal
operation.
First, try to clear the problem as you would with the system administrator’s
terminal, then follow the steps for auxiliary terminals.
Procedure 64
The terminal does not display Meridian Mail Compact Option screens
1 The system administrator may have inadvertently switched to the
Option 11C Compact software. If you see the
>
prompt, enter AX
<Return>.
2 Press <Control> ] to switch to Option 11C Compact software and, at
the
>
prompt, enter AX <Return>.
3 Reset the console port (port 8) by disabling it and reenabling it, as
follows:
a) Follow the procedures described in
“Enabling and disabling the
console and AML data ports” on page 208
. Reset the console port
only; do not reset the AML (port 9).
b) Enter AX <Return> to return to Meridian Mail Compact Option.
—————————— End of Procedure ——————————
The terminal displays the Meridian Mail Compact Option screens
incorrectly
Occasionally, the connection between Meridian Mail Compact Option and
the system administrator’s terminal may generate extraneous characters that
cause the terminal to display the Meridian Mail Compact Option screens
incorrectly.
Procedure 65
The terminal displays the Meridian Mail Compact Option screens
incorrectly
To redraw the screen press <Control>
R
.