Nortel Compact ICS 7.1, Руководство координатора

Страница: 63 / 266

Answering calls / 63
N0130955 01 Compact ICS 7.1 System Coordinator Guide
you do not make any changes before answering the call. If you plug in a
headset, the telephone will automatically switch the voice path to headset.
This will not change the mute status of the call. You can also change the
voice path by choosing either the handsfree or headset button.
7316E voice path features : The 7316E digital phone must be set to
Auto
to allow activate the handsfree, which is located under the dial pad, beside
the mute and headset buttons.
Answering calls without lifting the handset
1. Press the line button for the ringing call.
This step is not necessary if you have a prime line assigned to your
telephone.
2. Press the handsfree button. The internal microphone and speaker are
automatically turned on.
Note: The 7316E digital phones have a handsfree button located below the
dialpad. This button only works if the telephone is wired to a system
running version 6.1 or newer software and the
Handsfree
setting in
programming is set to
Auto
.
Handsfree is not available for the 7000 and 7100 digital phones, analog
telephones and Digital Mobility phones, unless otherwise noted by the
manufacturer.
Making calls without lifting the handset
1. Press the handsfree button.
If you do not have a prime line assigned to your telephone, press a line
button. The internal microphone and speaker are automatically turned
on.
Note: The 7316E digital phone has a handsfree button located below the
dialpad. This button only works if the telephone is wired to a system
running version 6.1 or newer software and the
Handsfree
setting in
Tip -
Direct your voice toward the telephone. The closer
you are to the telephone, the easier it is for the
microphone to transmit your voice clearly to your
listener.