Nortel Compact ICS 7.1, Руководство координатора

Страница: 131 / 266

Communicating in the office / 131
N0130955 01 Compact ICS 7.1 System Coordinator Guide
Analog telephones connected to an ASM cannot retrieve external messages
by using the Message Waiting Reply feature (
˚ •flfi
). For
external messages, users must call back the external voice mail center to
retrieve their messages. When doing so, the message waiting indicator on
the analog telephone is turned off automatically.
Removing items from your message list
You can erase a message while you are viewing it in your message list. If
the message is from your voice message center, this only erases the
message notification at your telephone. You still need to erase the voice
message at your voice message center. Refer to your voice message center
documentation.
On a telephone with a one-line display:
Press
≥
.
On a telephone with a two-line display:
Press
ERASE
.
Removing items from your message list using an
analog telephone
To remove both internal and external messages on an analog telephone,
Press
˚ £flfi
to invoke the Cancel Message Waiting feature.
On analog telephones connected to an ASM, the Cancel Message Waiting
feature cancels the oldest message received. The system no longer provides
either a Stuttered Dial Tone or a Message Waiting Lamp if there are no
messages pending.
Tip -
If the designated direct-dial telephone of an
analog telephone connected to an Analog Station
Module (ASM) is changed, messages sent by the
previous designated direct-dial telephone are kept in the
incoming message list of the analog telephone until they
are retrieved.