Nortel CallPilot 1001rp, Руководство по установке и настройке

Страница: 106 / 368

Using CallPilot Manager to monitor hardware Standard 1.0
106 CallPilot
Viewing the last diagnostic results
Introduction
You can review the results of previously-run diagnostics by clicking the Get
Last Results button for a component.
To view the last diagnostics result
1 In CallPilot Manager, click Maintenance
➝
Maintenance Admin.
Result: The Maintenance page appears.
2 Click the plus sign (+) beside the CallPilot server to expand the
component tree.
3 Continue clicking the plus sign (+) until the component with which you
want to work is visible.
4 Click the hardware component for which you want to run diagnostics.
Result: The Maintenance page refreshes to show details about the
component.
ATTENTION
Nortel Networks recommends that you courtesy stop rather
than stop a component if possible. For instructions, see
“Starting and stopping components” on page 97.