Nortel CallPilot 1001rp, Руководство по установке и настройке

Страница: 102 / 368

Using CallPilot Manager to monitor hardware Standard 1.0
102 CallPilot
Diagnostic tests available for each component
The diagnostic tests that are available for each component are listed in the
Diagnostic section of the Maintenance page. To view the list of diagnostic
tests for a particular component, click the component in the component tree.
If a diagnostic test fails or cannot be run
If a warning message appears, the diagnostic test cannot be run because a
prerequisite condition has not been met. If a diagnostic test fails, a message
appears in a new browser window (see the example on page 105).
In both cases, check the Alarm Monitor to determine the reason and the
appropriate action to take. (See “Tools for isolating and fixing hardware
problems” on page 77.)
If the Alarm Monitor and Event Browser do not provide a solution to a
hardware problem, you may need to replace or service a component. If the
problem is with a component that is not replaceable because it is not a
physical entity (such as the Time Switch), you must either replace its parent
component or contact your Nortel Networks technical support
representative, depending on the component.
MPCs (embedded on MPB boards or on
MPC-8 cards) Yes Embedded: No
MPC-8 cards: Yes
DSPs Yes No
Channels No No
DS30X link No No
Component
Diagnostics
available?
Replaceable?