Nortel business policy switch 2000, Руководство пользователя

Страница: 224 / 412

224 Chapter 3 Using the console interface
208700-C
Rate Limiting Configuration screen
The Rate Limiting Configuration screen allows you to limit the forwarding rate of
broadcast and multicast packets.
Figures 80 and 81 show sample rate limiting values for the two Rate Limiting
Configuration screens.
Table 35 Monitoring modes
Field Description
Port-based:
Disabled Default value for this feature.
-> Port X Monitor all traffic received by Port X.
Port X -> Monitor all traffic transmitted by Port X.
<-> Port X Monitor all traffic received and transmitted by Port X.
-> Port X or Port Y -> Monitor all traffic received by Port X or transmitted by Port Y.
Note: Do not use this mode for broadcast or multicast traffic.
-> Port X and Port Y -> Monitor all traffic received by Port X (destined to Port Y) and then
transmitted by Port Y.
Note: Do not use this mode for broadcast or multicast traffic
<-> Port X and Port Y <-> Monitor all traffic received/transmitted by Port X and received/
transmitted by Port Y.
Note: Do not use this mode for broadcast or multicast traffic
Address-based:
Disabled Default value for this feature.
Address A -> any Address Monitor all traffic transmitted from Address A to any address.
any Address -> Address A Monitor all traffic received by Address A from any address.
<-> Address A Monitor all traffic received by or transmitted by Address A.
Address A -> Address B Monitor all traffic transmitted by Address A to Address B.
Address A <-> Address B Monitor all traffic between Address A and Address B (conversation
between the two stations).
Note: If a port is configured for rate limiting, and it is a MultiLink
Trunk member, all trunk member ports implement rate limiting. Also, if
a trunk member is implementing rate limiting and the port is disabled
from rate limiting, all trunk members are disabled from rate limiting.