Nortel BSG12aw, Руководство по установке

Страница: 21 / 66

Hardware overview 21
Installation
If more than one BSG8ew/12ew/aw/tw unit is mounted on top of other units, only the unit lowest
from bottom should have WiFi activated to prevent radio interference. The stacked antennas may
have to be laterally adjusted.
Wall-mount bracket kit
Only the BSG8ew unit can be mounted on a wall.
To mount a BSG8ew on the wall, you need a wall-mount bracket and a BSG8ew wall-mount kit.
(The wall-mount kit contains a BSG8ew-specific door, antenna adapter, and power supply holder.)
Y
ou attach the wall-mount bracket to the wall, and then you install the unit in the wall-mount
bracket. If your system includes additional units (BCM50, BES50, or BSG8ew), you need a
wall-mount bracket for each unit.
Each wall-mount bracket includes a cable-management tray to store and organize the cables
connected to the BSG8ew. To position the antenna against the unit, an antenna adapter is also
included. For more information, see
“BSG8ew in a wall-mount bracket” on page 21 .
BSG8ew in a wall-mount bracket
BSG8ew
Cable-management tray
Wall-mount bracket
Antenna adapter