manualshive.com logo in svg

Nortel BCM50 3.0, Быстрый старт

Поделиться
Скачать
Nortel BCM50 3.0 Скачать руководство пользователя страница 34

34

Chapter 3 Hardware installation

NN40020-308

If an external DHCP server is not present

If an external DHCP server is not present, then the main unit uses the following default IP 
configuration: 

The DHCP server on the main unit supplies IP configuration information for all IP devices (PCs 
and IP Phones). It also supplies specific connection information to the IP Phones.

If an external DHCP server is present

If an external DHCP is present, then the BCM50 system uses the IP configuration supplied by the 
external DHCP server. 

In this case, the DHCP server on the main unit supplies only IP Phones with IP configuration 
information. It does not supply any other devices with IP settings. This means that the 
administrator does not need to set up the external DHCP server to supply configuration settings to 
the IP Phones. 

The DHCP server on the main unit must configure a range of IP addresses to supply to the 
IP Phones. It uses the top 20 percent of a subnet. 

For example:

If the external DHCP server supplies the IP address 177.218.21.45 (subnet mask is 255.255.255.0) 
to the BCM50, then the BCM50 DHCP server reserves the range 177.218.21.200–177.218.21.254. 

You can use Element Manager to verify and change this default range.

The administrator must ensure that this range agrees with the network configuration. The range is 
not used by the external DHCP server.

BCM50a, BCM50e, BCM50ba, or BCM50be main unit 
(with integrated router) 

You can select the DHCP server option to use with the BCM50 integrated router main units. You 
can select to use the integrated router or you can disable the integrated router and use the DHCP 
server that is on the main unit. Select the DHCP server option through Element Manager 
(Configuration > Data Services > DHCP Server > General Settings tab).

IP address:

192.168.1.2

Subnet mask:

255.255.255.0

Gateway:

192.168.1.1

Warning: 

The DHCP server on the main unit is enabled by default. If your 

network already contains a DHCP server, then disable the DHCP server on the 
main unit.

Содержание BCM50 3.0















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды