Nortel BCM50 2.0, Руководство по установке

Страница: 61 / 86

Chapter 8 Relocating telephones 61
Telephony Device Installation Guide
4 If the new location is on a different subnet, you must make the appropriate changes to the
telephone IP addressing. However, do not change the S1 IP address or the S2 IP address.
Disconnect the power from the IP telephone or three-port switch.
To move a Nortel IP telephone and change the DN
1 Deregister the DN.
2 Disconnect the network connection and the power connection from the telephone.
3 Reinstall the telephone at the new location, and reconfigure the telephone.
User card list
The following is a list of feature and device user guides that can be found on your system CD:
• IP Phone 2001 User Guide
• IP Phone 2002 User Guide
• IP Phone 2004 User Guide
• IP Phone 2007 User Guide
• IP Phone 1120E User Guide
• IP Phone 1140E User Guide
• IP Audio Conference Phone 2033 User Guide
• IP Softphone 2050 Installation Guide
• IP Softphone 2050 User Guide
• Telephone Feature User Guide
Note: If your network is using partial DHCP, reconfiguration is not required at
this step.