Nortel BayStack 450 Switch, Руководство по установке

Страница: 82 / 142

82 Telephone installation
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009
Copyright © 2006-2009 Nortel Networks
--End--
IP phone installation
Configure the system to automatically assign DNs to the Nortel IP Phones. If
you choose to manually assign DNs, choose DNs from unused DNs in the
digital range. However, port numbers are assigned from DS30 01 (ports 0101-
0132) first; then from DS30 08, if ports are available, and DS30 07 if the
system uses a 3/5 DS30 split. If no ports are available on those DS30 blocks,
the system can assign digital set port numbers. Also, ensure that you do not
assign DNs that are assigned to Call Center mailboxes (CDNs).
Mobility system installation
All radio-based mobility systems have documentation that describes the
hardware and installation and activation of the handsets.
The BCM main unit can support a maximum of two digital mobility controllers
(DMC), which are the call processing units between the BCM main unit and
the digital mobility base stations and handsets. The DMCs have a one-to-one
connection with digital ports on the BCM main unit.
For installation and configuration details, see the Digital Mobility Installation
and Configuration Guide (N0000623).
T7406e cordless telephone installation
The T7406e cordless system consists of a base station that connects up to
three digital station ports on the BCM450 system, that provide a radio
interface for three cordless handsets. The cordless handsets register to the
base station, which transfers the call over the telephone lines connected to the
system. The handsets are configured to emulate the T7316/M7310 telephone
features. This system is most suited for small- to medium-sized office
environments that are set up in an open fashion.
For installation and configuration details, refer to the T7406E Cordless
Handset Installation and Configuration Guide (NN40110-301).