Nortel 703t, Техническое обслуживание и диагностика

Страница: 89 / 248

January 2007 Using CallPilot Manager to monitor hardware
703t Server Maintenance and Diagnostics 89
Viewing component states
View a component state to determine the general condition of the
component, including whether the component is disabled or off duty.
The component state is shown in the Maintenance section of the
Maintenance screen.
Component states
You can determine the state of a component by looking at the State box
in the Maintenance section.
State Description
Active The component is working and currently involved
in processing a call.
Disabled The diagnostic failed.
Idle The component is working but not currently
involved in processing a call.
In Test A diagnostic is running on the component.
Loading The component has been started, which takes it out
of the Off Duty state.
This state occurs quickly and is immediately
followed by Idle.
No resources The hardware required for the component to
operate is not installed or is not operating properly.
Not Configured The component is not configured in CallPilot.
For example, a multimedia channel is not being
used because it was not allocated in the
Configuration Wizard.