Nortel 703t, Техническое обслуживание и диагностика

Страница: 180 / 248

RAID operations Standard 1.06
180 CallPilot
Verifying consistency on the drives
This optional consistency check on the logical drive of the RAID system
ensures that the data on the drives is identical. If any errors are found,
they are corrected automatically. Perform a consistency check
before
you split the RAID system pack. A good data backup on an offline drive
is important if you need to revert to the CallPilot system from an
unsuccessful upgrade or update. The consistency check can take up to 2
hours to complete.
To perform a consistency check
1 In Windows, click Start
➝
Programs
➝
Power Console Plus
➝
Launch Client.
Result: The MegaRAID Power Console Plus - Server Selection
window appears.
2 Ensure that Access Mode
➝
Full Access is selected, and click OK.
Result: The MegaRAID Power Console Plus window appears
displaying the Logical View of the Physical Devices and the Logical
Devices. The status bar at the bottom of the window indicates that
RAID channels are being scanned. When scanning is done, the
screen refreshes and displays the Physical and Logical Devices.
3 In the Logical Devices section, right-click the logical drive, and then
choose Check Consistency from the pop-up menu.
Result: The Check Consistency status dialog appears.
Note: The check can take up to 2 hours to complete. You are
informed when it is finished. If any errors are found, a window with
an error message is displayed.
4 Select Configuration
➝
Exit to close the MegaRAID console.
Result: An end of session message appears.
5 Click OK.