Nortel 703t, Техническое обслуживание и диагностика

Страница: 104 / 248

Using CallPilot Manager to monitor hardware Standard 1.06
104 CallPilot
3 Do one of the following:
4 Click Courtesy Stop, Stop, or Start, as required.
Result: If you clicked Courtesy Stop or Stop, you are asked to
confirm the Courtesy Stop or Stop. Click OK.
The selected channels change to idle or on-duty status, according
to the action you chose.
If the buttons are not available, wait a few seconds for the screen to
refresh:
„
The Courtesy Stop and Stop buttons are available only when a
component is in one of the following states: Idle, Active, Remote
Alarm, Local Alarms.
IF you want to stop or start THEN
all of the channels
associated with a link check the check box to the left of
the link that you want to stop or
start.
Repeat this step for each link.
only one or several
channels that are
associated with a link check the check box for each
channel that you want to stop or
start.