manualshive.com logo in svg

Nortel 425-24T, Руководство по настройке, Страница: 186 / 488

Поделиться
Скачать
Nortel 425-24T Скачать руководство пользователя страница 186

186

Chapter 4 Getting Started with Device Manager

320985-A Rev 01

 

Editing objects

You can edit objects and values in the Device Manager device view in the 
following ways:

•

Select an object on the toolbar, click the

 Edit Selected

 button. 

The 

Edit

 dialog box opens for that object.

•

From a switch or port shortcut menu, choose 

Edit

. The 

Edit

 dialog box opens 

for that object.

When you change the value in a box, the changed value is displayed in 

bold

. 

However, changes are not applied to the running configuration until you click 

Apply

.

Working with statistics and graphs

Device Manager tracks a wide range of statistics for the stack (chassis), and each 
port. You can view and graph statistics for a single object or multiple objects. For 
information about the statistics tracked for the switch and ports, refer to 

“Statistics 

for single and multiple objects” on page 190

 and to the 

System Monitoring Guide 

for Nortel Ethernet Switches 325 and 425, Software Release 3.6

(320989-A).

This section describes the types of statistics and graphs available, the graph dialog 
boxes, and the procedure for creating a graph.

Note: 

Many dialog boxes contain a 

Refresh

 button. After you apply 

changes to fields, click 

Refresh

 to display the new information in the 

dialog box.

Содержание 425-24T









































































































































































































































































































































































































































































































Отзывы:

Нет отзывов