Nortel 1002rp, Техническое обслуживание и диагностика

Страница: 86 / 218

Using CallPilot Manager to monitor hardware Standard 1.11
86 CallPilot
Viewing the last diagnostic results
You can review the results of diagnostics by clicking the Get Last
Results button for a component.
To view the last diagnostics result
1 Run CallPilot Manager and log in.
2 In CallPilot Manager, click Maintenance
➝
Maintenance Admin.
Result: The Maintenance screen appears.
3 Click the plus sign (+) beside the CallPilot server to expand the
component tree.
4 Continue clicking the plus sign (+) until the component with which
you want to work is visible.
5 Click the hardware component for which you want to run
diagnostics.
Result: The Maintenance screen refreshes to show details about
the component.
6 Scroll down to the Diagnostics section.
7 Select the check box for each diagnostic for which you want to
review results.
8 Click Get Last Result.
Result: The results appear in the Diagnostic Results box with the
following information:
„
diagnostic title
ATTENTION
Nortel recommends that you courtesy stop rather than stop
a component if possible. For instructions, see “Starting and
stopping components” on page 79.