Nortel 1002rp, Техническое обслуживание и диагностика

Страница: 105 / 218

January 2007 Using CallPilot system utilities
1002rp Server Maintenance and Diagnostics 105
For tower and rackmount CallPilot servers, DSPs reside in MPB96 and
MPB16-4 boards and MPC-8 cards. For 1002rp servers, DSPs are
distributed as follows:
„
MPB96 board has 12 DSP sections embedded on board
„
One MPB16-4 board consists of two embedded DSPs and up to four
MPC-8 cards.
„
Each MPC-8 card contains a single DSP.
DS30X links
In the DS30X link pane, each DS30 row represents a separate DS30X
link (also referred to as a DS30 link). Each box in the row represents one
DS30X channel.
The DS30X links connect the CallPilot server to the MGate card
(NTRB18CA) in the Meridian 1 switch or Succession 1000
*
system.
For the 1002rp server, the DS30X link to the switch is supported by the
connection of the server to the switch backplane.
T1 Links
In the T1 link pane, each row represents a T1 link. Each box in the row
represents one DS0 channel.
System Info tab
Figure 12 on page 106 shows an example of the System Info tab.