Nortel 1001t, Руководство по установке, Страница: 78 / 124

2-24 Installing hardware
Connecting peripherals to the 1001t Server
Standard 1.0 Nortel Symposium Call Center Server May 1998
1001t Hardware Installation Guide
Connecting cables
To connect cables to the 1001t Server chassis, follow these
steps.
Step Action
1 If the customer has purchased the optional voice prompt or
broadcast announcement features, connect the high speed
ACCESS link from Meridian Mail to the COM 2 port at the
rear of the server. Tighten the connector screws.
2 Connect the ELAN cable for the M1 AML link to the RJ45 jack
on the network card in PCI slot 1 at the rear of the chassis.
3 Connect the CLAN cable to the RJ45 jack on the network
card in PCI slot 5 at the rear of the chassis. Use the BNC
connector if the CLAN uses a coaxial cable.